Почему экраны ноутбуков входят в такие странные размеры?

We have been discussing this in the Comms Room on Serverfault, and thought it might make a good question on SuperUser…especially if there is a clear answer. The hope is that it is a Good Subjective question.

Why do laptop screen sizes come in the fractional sizes they do instead of 11/12/13/14/15″? The most frequent ones I see advertised are 11.6″, 12.5″, 13.3″, 14″, and 15.6″. What is the reasoning behind it? Keyboard size? Ergonomics? Resolution requirements? Most are LCD screens just like television sets, and yet televisions are advertised as whole numbers (19″, 26″, 46″, etc.).

Looking at actual LxWxD dimensions on laptops does not really help since screen bezels vary in size.

For instance, this example: 11.6″ laptop dimensions = 11.55″ x 8.50″ x 1.27″ - this is due to a rather large bezel.

Whereas my x1 carbon touch has a 14″ diagonal screen, but its dimensions are equal to a WQHD Touch: 13.03″ x 8.94″ x 0.55″ (Front), 0.79″ (Rear) - again bezel. If it could be edge to edge, that would be different, and “normal math” would insist the actual “monitor size” was about 15.5″, which it is if you include the bezel.

So:

Are there actual equations/ratios/mathematical factors in determining screen sizes on a laptop that make certain sizes more common than others? Note that I stated screen size (like the common 11.6″, 13.3″, 15.6″, etc.) and not actual dimensions of the monitor lid itself.

To Help Clarify The Question:

I am asking why those particular fractional sizes are so common? Look at HP, Lenovo, and Dell. They all tend to go with those screen sizes. Is it because it is what the consumers are used to seeing or using? Is it dictated by resolution requirements that ‘control’ the screen size (meaning 11.6″ works out resolution-wise, but 11.7″ does not)? Or is it something else? If you want to hone in on one: Something, somehow determined that 11.6″ was a good common screen size…I am curious what that was.

Display sizes are determined primarily by how many displays will fit on one mother glass slab at the manufacturing plant.

The manufacturing plant starts off with a single slab of glass on which the displays will be manufactured. Mother glass sizes are mostly standardized in the industry, and are increasing:

It does not make sense to create a manufacturing line for a single size of display. It makes more sense to create a manufacturing line that handles the same size mother glass slab, and just change the number of displays created from the mother glass slab based on the order requirements.

Since the manufacturing line glass is not going to change in size, once you know the size of the display you want, you can determine how many of them can fit onto one mother slab. If there is additional space, it makes sense to increase the size until you are using as much space on the slab as possible, without going over your size requirement.

So the 10th generation glass will make one 150″ TV (which is only used at tradeshows simply to showcase the size of the mother glass a given factory can handle), or it will make nine 50″ TVs. The second generation glass was able to make a nice 24″ desktop display, or four 11.6″ displays.

A more in-depth treatment of this can be found at Norm’s Flat Panel. AUO has a nice interactive diagram that shows cutting patterns for a few sizes up to generation 8.5 glass. While I included 11th generation size, there are no plants currently operating at this size. It is expected the first such plants will open in 2015 or 2016, and they may use mother glass somewhere between 10th and 11th generation. Keep a watch for the next tradeshow as other manufacturers demonstrate 150″ TVs to show off their new 10th generation plants, and eventually 180″ TVs as the first 11th generation plants come online.